The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB030 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB030 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
This Part Fits:
Recently Viewed Products
Great place for parts..
Jared and his wife are knowledgeable and good people . Have spent well over $6000 with them and took a lot of advice from Jared while building my race truck. A place you can trust
These guys are absolutely top notch. Jared is an absolute pleasure to work with and his knowledge is never ending. Highly recommended!
Great shop. Fair prices and quality work. This is the only place I’ll take my mildly built street car, whether it’s for an oil change or an engine refresh.
Need help? We're available at 1-208-948-9601 or Email us at: firstname.lastname@example.org